EZ2014
-
FRAME CONNECTOR PKG, EZ
DETAIL Y
BILL OF MATERIALS
DESCRIPTION
ITEM CODE
QTY
ID
X-BRACE
EZ1100
4
1
PURLIN, BASKET, 73 1/2"
GM4000
3
2
SLIDE BAR, GM 2000
GMSA52
2
3
ASSY, S.A. BOTTOM RAIL, 74"
SA4013
2
4
ASSY, S.A. TOP RAIL, 74" (BROWN)
SA4018
2
5
3'-0" x 55 1/4" 8MM CLR PCSS
SS1005
4
6
CARRIAGE BOLT, 1/4"x 3/4", G5
NB1820
4
7
WASHER, LOCK, 1/4" ZP
NB1860
4
8
WING NUT, 1/4" ZP
NB1902
4
9
SNAPPER PIN, .250" x 2.25"
NB1996
2
10
SLIDE SIDE INSTALLATION
18
REV: AE-201007
Y
2
6
3
1
1
8
10
7
2
2
6
6
4
5
1
1
7
8
4
5
6
7
8
9
7
8
9
9
9
3
4. Remove the protective film from the Clear Polycarbonate Panels (SS1005) and be certain to install the Panels with the
UV protective (blue) side to the outside of the structure.
5. Set the Panels into the Bottom Rail and bend the middle outward until the panel is short enough to insert into the Top Rail.
6. Slide the Panels toward the center of the opening and attach the Slide Bars (GMSA52) to the End Caps (GMSA51) and
Dividers (GMSA50) using a 1/4" Carriage Bolt (NB1820), 1/4" Lock Washer (NB1860) , and 1/4" Wing Nut (NB1902) at each
Slide Bar end as shown.
7. Secure the structure to the ground surface as shown in the ANCHORING LAYOUT instructions.
1/4" Carriage Bolt
(NB1820)
1/4" Lock Washer
(NB1860)
1/4" Wing Nut
(NB1902)
