EZ5006
EZ5012
EZ5018
EZ5024
ANCHORING LAYOUT
7
REV: AE-201007
1. Prepare a hard level foundation for your product. The product must be
built on a solid level surface in order to perform properly. We recommend
using concrete or wood deck as base.
2. Prepare for assembly of this product by gathering the following tools:
step ladder, rubber mallet, wire cutters, safety glasses, and gloves.
3. Determine the structure model which you have purchased and refer
to the overview on one of the pages 3-6.
4. Open the packaging and sort components by the bill of materials for
each of the packages EZ2011 - EZ2015. Refer to the bills of materials
on pages 3-6, as some models do not need all the packages.
5. Do not place this structure on a slope that exceeds 3 degrees of slope
without blocking the frames to be within this slope.
6. After assembly, secure the product to the ground surface at the
designated securement locations using suitable anchoring. (Not supplied)
6'-0"
3'-
2 7/
8"
3'
-8 1/
4"
3'-2 7/8"
10'-2"
6'-0"
6'-0"
3'-
2 7/
8"
3'
-8 1/
4"
3'-2 7/8"
12'-0"
10'-2"
18'-0"
3'
-2 7/8"
3'-8 1/4"
3'-2 7/
8"
10
'-2"
6'-0"
6'-0"
6'-0"
3'-2 7/
8"
3'-
8
1/
4"
3'
-2 7/8"
24'-0"
10
'-2"
6'-0"
6'-0"
6'-0"
6'-0"
