Poly-Tex Superior EZ5006, Руководство по сборке

Страница: 12 / 22

EZ2012 - END PKG, NO DOOR, EZ
BILL OF MATERIALS
DESCRIPTION ITEM CODE QTY ID
BENCH FRAME, REAR END, LH EZ1004 1 1
BENCH FRAME, REAR END, RH EZ1006 1 2
TUBE, 1.250 SQ x 14GA, 55.5 IN EZ1101 2 3
WLDMT, HEADER, 79 IN EZ1104 1 4
REAR BASE EZ1114 1 5
PEAK, END EZ1124 1 6
PEAK SUPPORT, END, LH EZ1126 1 7
PEAK SUPPORT, END, RH EZ1128 1 8
END CAP, GM2000 GMSA51 2 9
CARRIAGE BOLT, 5/16"x2-1/2", G5 NB1816 2 10
WASHER, LOCK, 5/16" ZP NB1862 2 11
WING NUT, 3/8" ZP NB1901 7 12
WING NUT, 5/16" ZP NB1903 2 13
WASHER, FLAT, NYLON NB1923 7 14
END FRAME ASSEMBLY EZ2012
12
REV: AE-201007
8
5
14
12
9
14
12
12
14
14
12
2
1
4
7
6
10
11
13
3
3
12
14
12
14
9
14
12
10
11
13
4. Attach the (2) End Frame Tubes (EZ1101) & (2) End
Bench Frames (EZ1004, EZ1006), to the PEAK /
HEADER SUBASSEMBLY. (The WIGGLE WIRE BASE
on the PEAK / HEADER SUBASSEMBLY should line up
with the WIGGLE WIRE BASE on the Bench Frames
(EZ1004, EZ1006).
5. Attach the Rear Base (EZ1114) to the END FRAME
SUBASSEMBLY using (2) Nylon Washers (NB1923)
and (2) 3/8" Wing Nuts (NB1901).
6. Set aside the remaining (2) End Caps (GMSA51), (5)
Nylon Washers (NB1923), and (5) 3/8" Wing Nuts (NB1901)
for now.
2
3
3
PEAK / HEADER
SUBASSEMBLY
1
END FRAME
SUBASSEMBLY
END FRAME
SUBASSEMBLY
12
12
14
5
12
14
12
12
14
14
12
14
12
9
14
9
14
END FRAME
SUBASSEMBLY