POLTI Vaporetto MV 40.20, Инструкция по эксплуатации

Страница: 37 / 120

2.2 VACUUM FUNCTION
It is possible to use this function with: the
Steam & Vacuuming Kit PAEU0374 (chap.
7.1).
• Press the main switch (I).
• Press the button on the handle to activate
or deactivate the vacuuming.
2.3 STEAM - DETERGENT FUNCTION
It is possible to use this function with: the
Steam & Vacuuming Kit PAEU0374 (chap.
7.1), the Vaporflexi Brush Steam Kit
PAEU0376 (chap. 7.2), the Steam Mop
accessory PAEU0246 (chap. 7.16).
• Press the main switch (I). The steam ready
light (N) will begin to flash until it becomes
constant (around 5-10 minutes), at this
point the appliance is ready to generate
steam.
• Press the detergent switch (K). The deter-
gent light (L) comes on.
• Ensure that the steam lock on the handle is
deactivated (chap. 7.1, chap. 7.2).
• Press the steam/detergent request button
on the handle to release the detergent (7.1,
7.2). To disable the detergent function,
press the switch (K). The light (L) will go
out.
2.4 COMBINED FUNCTIONS
It is possible to combine the following func-
tions:
STEAM – VACUUMING
STEAM – DETERGENT
STEAM – DETERGENT – VACUUMING
These functions are possible with: the Steam
& Vacuuming Kit PAEU0374 (chap. 7.1), the
Vaporflexi Brush Steam Kit PAEU0376 (chap.
7.2), the Polti Sani System Kit PAEU0370
(chap. 7.15), the Steam Mop accessory
PAEU0246 (chap. 7.16).
3. CONNECTION KIT AND
OPTIONAL ACCESSORIES
All the accessories can be connected directly
to the flexible steam/vacuum hose (1; 9) or to
the extension hoses (2; 10).
3.1 Hook the two extension tubes onto the
handle :
Move the locknut of the
accessory, if present, to
the OPEN position and
connect the accessories.
Move the accessory
locknut to the CLOSED
position.
Check the strength of the
connection.
There is another lock
button on the extension
tubes:
proceed as above for the
accessories, releasing the tubes by sliding the
button as far as the lock position.
3.2 To use the other accessories proceed as
follows:
- Move the locknut to the OPEN position and
pair the accessories.
- Move the accessory locknut to the CLOSED
position.
Check the strength of the connection.
3.3 To connect the special accessories only
for vacuuming it is only necessary to pair
them.
3.4 To connect the steam lance to the steam
concentrator, screw it on. The same
operation can be carried out for the coloured
brushes, which can be screwed both onto the
steam concentrator and onto the steam
lance. The different colours enable a
diversified use of the brushes according to
the surface to be treated.
4. STEAM ADJUSTMENT
You can optimise the steam flow by means of
the steam adjustment knob (O).
Turning the knob clockwise increases the
steam jet. To reduce it, turn the knob anti-
clockwise. Here are some tips for regulating
it.
• Maximum level 3: to remove encrustations,
stains, grease and for more stubborn dirt;
• Medium level 2: for carpets, rugs, glass and
floors;
• Minimum level 1: to steam plants, clean
delicate fabrics, wall coverings, upholstery,
etc.
WARNING: On the first release of steam,
there may be some drops of water mixed
with the steam due to temperature imbalan-
ces.
Direct the first jet of steam onto a rag.
To avoid any dirt in the dirt collector causing
bad smells, we recommend emptying and
cleaning after every use according to the
methods described in Chapter 12.
E
N
G
L
IS
H
| 37 |