Pololu Corporation Simple Hexapod Walker Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 21

Pololu Corporation Simple Hexapod Walker Скачать руководство пользователя страница 21

7. Conclusion and Community

The Micro Maestro can act as the brain for a simple hexapod robot. Three of the Maestro’s six channels are
used for the servos, so there are three channels available for sensors such as distance sensors, which the hexapod
can use to react to its environment. The Maestro’s scripting functionality allows simple behaviors and motion
sequences to be programmed onto the device, making the hexapod autonomous.

Did you manage to build the hexapod or something like it? Please join us on our

[http://forum.pololu.com/]

to ask questions, give feedback, or share your projects. We would love to hear about

your experiences, and we would be delighted to see any improvements or alterations you make!

We will post hexapod projects submitted by others below:

My first attempt at a hexapod walker.

[http://letsmakerobots.com/node/19050]

A hexapod built by letsmakerobots.com user AndyGadget using a PICAXE-08M. This design has

the batteries underneath and the servos in front, and it uses small beads as feet.

Hexapod clone (my first bot)

[http://letsmakerobots.com/node/16683]

A hexapod built by letsmakerobots.com user Bruud using the Micro Maestro and HD-1440a

servos. He used the assembled version of the Micro Maestro, plugging wires in instead of

soldering them, so that he could re-use all of the parts later.

ShC v1 (Simple hexapod Clone version 1)

[http://letsmakerobots.com/node/15458]

This is a simple hexapod built by a letsmakerobots.com user who was inspired by the Pololu

Simple Hexapod Walker.

Build Yourself a Bluetooth Controlled Six-Legged Robot

[http://blog.sigfpe.com/

2011/02/build-yourself-bluetooth-controlled-six.html]

A small hexapod using the Micro Maestro that is controlled remotely using a Bluetooth module.

By sigfpe, February 2011.

Sample Project: Simple Hexapod Walker

© 2001–2010 Pololu Corporation

7. Conclusion and Community

Page 21 of 21

«
...
19
20
21

Содержание Simple Hexapod Walker






















Отзывы:

Нет отзывов