Politec SANDOR WS SMA, Инструкция по установке и монтажу

Страница: 12 / 28

12
SANDOR WS SMA POLITEC | INSTALLATION MANUAL - VER.3.1
10.SK WS RX motherboard connections
Column tamper
connector
Battery connectors
3.6 V - 19 Ah
P.S.The second battery
is optional
3.6 V
3.0 V
(BL)
(SL)
(AN)
(AMK)
Jumper to enable tamper
alarm reception of the TX
column
1 / 2 HTR
Heater power supply 24V / 12V (only from external source)
3/4 ALARM NC alarm output
5 / 6 TAMPER NC Tamper output
7 / 8
OUTPUT POWER
SUPPLY
Output to power the radio transmitter with the voltage of 3.0 V or 3.6
V via the selector
BL BATTERY LOW
Low battery signal output due to the opening from the negative of an open
collector (NC)
SL SIGNAL LOW
Fog disqualification signal output given by the closing to negative of an open
collector (NO)
AN
AND FROM
REMOTE
By connecting a 3.6 V positive, the AND function is activated by remote
control
AMK ANTIMASK
Output of masking signal given by the closing to negative of an open collector
(NO)
TAMPER TX
Removing the jumper disables the optical reception of the tamper alarm of
the transmitter barrier, in case of tampering
TERMINAL BOARD with 8 ports
TERMINAL BOARD with 4 ports
Transmitter
power
selector
1 2 3 4 5 6 7 8