17
SANDOR QUAD ESA SMA
POLITEC | INSTALLATION MANUAL - VER.3.1
12.2 Alignment
•
Power the unit electrically
•
Starting from the Receiving column, press the TEST button on the first RX optic for 3 seconds or
until the buzzer emits an intermittent acoustic signal, accompanied by the equally intermittent
flashing of the long-range high-intensity LEDs.
•
Press the TEST button on the TX optic of the corresponding column for 5 seconds, in this case only
the orange TEST LED will light up.
•
Orient the TX optic towards the RX optic, vertically and horizontally acting as explained above,
until you find the maximum alignment.
•
The maximum alignment condition will be reached when the high-intensity LEDs are on steady
and the buzzer will emit a continuous sound, for this reason, it may be necessary to make minor
adjustments also on the RX optic.
TX
RX
TX
RX