16.Archive
31
ADEBUS & GAPID EXPLORER
POLITEC | INSTALLATION MANUAL - VER.1.8
The
Archive
menu displays the history of the events recorded on the Adebus G board.
Event storage can be enabled or disabled through system configuration.
The Adebus G board maintains a maximum of 32000 events by overwriting the oldest in case of
running out of available space.To view a greater number of events, it is necessary to open
.db
database files in the Gapid Explorer work folder using an appropriate program.
16.1 Description of events
Group alarm
:Alarm recorded on the sensor group after algorithmic analysis on all sensors in the
group
Alarm
:Pre alarm of the single sensor.This alarm does not imply a Group alarm
Msg
.
Board in use
:In the case of absence of events within 24 hours, a board in use status is recorded
Online
:In case of loss of communication on a single sensor, the whole group goes OFFLINE
High BadCom \ Day
:In the event that a sensor loses several packets within 24h but not
communication, an alert is given.This function can be useful to check if there is a false contact or a
slight anomaly on a single sensor.
Tamper
:Single sensor tamper:In the event that a sensor within the Group presents a signal, the entire
Group goes to Tamper.
Board reboot
:In case the Adebus G board is restarted
Board reboot for WatchDog
:In case there is an automatic restart of board due to anomaly
Test
:Test command on single sensor
Vin Low
:In the case of low power supply on a single sensor.
Configurations Reset
:In case of complete reset of the configurations
Event reset
:In the case of complete reset of events due to anomaly
Status
1
: presence of event on Group \ Sensor
0
: Group \ Sensor return to rest
Gapid
1-255
:Signalling from the Group \ Sensor
0
:Signalling from the Adebus G board
COM
1:Serial Line 1
2:Serial Line 2
0:No line, master board
