23
ADEBUS & GAPID EXPLORER
POLITEC | INSTALLATION MANUAL - VER.1.8
Connect to the created
site and carry out
auto-
addressing
using
the
appropriate
button
to
activate all the Gapid SRs
present on the configured
COMs.
The system will provide an outcome of the self-addressing operation.
If there are unaddressed sensors check the wiring between the last addressed sensor and the first
unaddressed sensor and check the addressing again.
Select the board created, select the COM1 - COM2 serial port connected to the Gapid SR sensors and
activate the
Segments
function.
Create segments inside
the image with the left
button of the mouse.
They
represent
the
sensors
connected
on
cable along the fences.
Each segment is asked for
the number of Gapid SR
present in the line.
Using the right button it is
possible to connect the
various
segments
and
modify them.
