1.Introduction
3
ADEBUS & GAPID EXPLORER
POLITEC | INSTALLATION MANUAL - VER.1.8
Congratulations on having purchased the Politec monitoring control unit.This appliance
guarantees long-lasting and reliable operation if installed correctly.For correct and effective use,
it is necessary to read this instruction manual carefully.
The sensor and the monitoring control unit have been designed to detect intrusions
and activate the alarm; it is not a device that prevents intrusion.Politec is not
responsible for damage, injury or loss caused by accidents, theft, force majeure
(including momentary lightning-induced overcurrent), abuse, improper or incorrect
use, faulty installation or inadequate maintenance.
2.
Product description
The Adebus & Gapid Explorer is a monitoring control unit for the management of up to 128
sensors divided arbitrarily into 2 branches (expandable) using both the serial ports Com0 and
Com1.Adebus Gapid manages, supervises and configures every single Gapid SR (or groups)
combined with Adebus hardware boards, set up with the appropriate firmware, reachable
through a TCP/IP connection.
This system is ideal for sensor management for perimeter protection of large areas.
It is equipped with an internal algorithm system that allows multiple sensors to be installed on
the same site in different applications and realtime management of every single vibration.The
main features of this system are as follows:
•
Detection of each alarm of the individual group or sensor.
•
Ability to interact on all system parameters, to know and change the status of the sensors
(single or group);
•
Each sensor, single or in group, can be configured and verified in real time: all operations can
be performed locally or remotely via WEB;
•
Store and download up to 32000 events on a PC.
Warnings
Mounting, installation of the barrier and connection to the mains must be carried out
by expert and qualified personnel, in compliance with rules and regulations applicable
to electrical systems.
