English
Quick Reference
22
Loading 4x5 Film
1
Verify that the 4x5 camera
back is attached, and turn
the film recorder on.
2
In a darkroom, load the
4x5 film holder with film.
Orient the film with the
notch positioned as
shown.
Note
: Some 4x5 films are
available in Readyload
packages. When used with
the Polaroid 545i or the Kodak Readyload packet film holder,
you can load the film holder outside of a darkroom.
3
Pull open the outer section of
the camera back enough, but
no more than 2" (51 mm), to
slide the film holder in.
Note
: Do not pull the outer
section too far. This can
cause the camera back to pop
out of the springs and
require Service Center repair.
Insert the 4x5 film holder into the camera back
from the right.
Note
: To avoid light leaks, make sure that the left side of the
film holder lies snugly against the left side of the outer section
of the camera back.