English
Installation
11
e
Press
, then press
or
to
highlight
Yes
(terminate) or
No
(turn
off termination).
f
Press
, then press
twice.
g
Press the Reset button on the back of
the film recorder.
Each device on a SCSI chain must have a unique SCSI ID. The
preset film recorder SCSI ID is 4. If the SCSI ID of any other
device is 4, either change the SCSI ID of that device (consult the
device documentation) or change the SCSI ID of the
film recorder.
7
If you need to change the film recorder SCSI ID:
a
Turn off the computer and all other
SCSI devices.
b
Turn on the film recorder.
c
Press
to display the
Change
Setup?
menu on the message panel.
d
Press
until
SCSI ID?
appears,
then press
to display the current
SCSI ID number.
e
Press
to select an unused SCSI ID
number. Note that the SCSI host
adapter is usually ID 0, and most
internal SCSI hard drives are ID 1. An
internal SCSI CD-ROM drive may be
ID 3.
f
Press
, then press
twice.
g
Press the Reset button on the back of
the film recorder.
