Polaroid M402b, Руководство по ремонту

Страница: 12 / 42

M402b MiniPortrait Camera Repair Manual Disassembly/Assembly
12
Shutter Plate Assembl
y (Figure 2-2)
Removal
1. Remove the front cover assembly (Figure 2-1).
2. Gently lift off the shutter plate assembly being careful not to disturb the alignment of the
shutter plates.
Note: If the shutter and the diaphragm plates are misaligned during the removal
of the shutter plate assembly, refer to the Shutter and Diaphragm Plate
assembly/disassembly procedure to properly realign (see page 24).
3. Disconnect the black and red X-sync connections from the shutter plate connector pins.
Figure 2-2. Removing shutter plate assembly
Installation
1. Connect the black and red X-sync connections from the camera body to the shutter plate
connector pins.
Note: Make sure the red and black X-sync wires are properly dressed so that they
do not interfere with the operation of the shutter.
Lens Cap
Aperture Knob
Front Cover
Assembly
Camera
Body
Lower Decal
Cover
Upper Decal
Cover
Shutter Plate
Assembly
Shutter Plate Assembly