Polaris Eos Command Center, Руководство пользователя, Страница: 27 / 32

E
25
Salt Chlorinators
If a Polaris AutoClearPLUS or other salt chlorinator is installed, a control screen is
provided to monitor salinity levels and access the chlorinator settings. The screen name
is designated by the chlorinator installed.
If the AutoClearPLUS is connected to a Watermatic C2100 that is controlled by the Eos
system, the Salt Chlorinator screen will not be displayed. Salinity and chlorine production
will be monitored and controlled by the Watermatic making this separate control screen
unnecessary.
The current salt concentration or salinity of the pool is displayed in parts
per million (PPM).
Mode provides operational options:
Normal – Chlorine production at normal rate.
Super – Produces the maximum amount of chlorine for 24-hours, then reverts
back to normal mode. If selected, the pool pump must be activated for a
24-hour run cycle as well.
Service – Disables control while chlorinator is being serviced.
Chlorination
adjusts the chlorine output from 0 to 100% in increments of 10.
Refer to the Polaris AutoClearPlus Installation and Maintenance Guide or the
chlorinator manual for recommended salinity levels, as well as complete operation
and maintenance information.
Tue, Aug 03 2:04pm
AutoClear
2600
ppm
Mode Normal
Chlorination Off