
E
21
To set an
Access Code
:
1.
Enable (check) the Access Code box. A
new screen will open and request a code.
2.
Press any four keys on the keypad, in any
order. Press <Enter> to activate the code.
All function selections will lock requiring
input of the access code to make changes.
To reset if the code is forgotten:
1.
Press the left and right arrow keys simultaneously
to open the Setup screen.
2.
Disable (uncheck) the Access Code box.
Shortcut Remote
During installation the control
functions of the Shortcut buttons
(A, B, C, D) are assigned and the
buttons are labeled.
In addition to two factory-set
functions, up to eight control
functions (4 on Shortcut #1 and
4 on Shortcut #2) can be assigned.
General guidelines for the Shortcut:
• Button LEDs light when their respective device is active.
• If lights (including dimmers) are setup, the remote controls
only the on/off function of the device.
• Temperature controls are the default on buttons A and B,
if a heater has been set up.
• Temp Up and Temp Down button LEDs light only when the
buttons are pushed.
• Temp Up and Temp Down increase or decrease the temperature
setpoint by one degree. When the maximum temperature is reached
(104 degrees for Spa), the Temp Up button LED will stay lit.
To switch from Shortcut #1 functions to Shortcut #2 functions
, press buttons
A and C simultaneously. The two button LEDs will flash; then the active shortcut
button (i.e., C = Shortcut #2) will illuminate. Press A and C again to switch back.
To activate the heater,
press buttons A and B simultaneously. The two button
LEDs will flash together three times. While the heater is firing, the two LEDs
will flash every 15 seconds. When the setpoint is reached the flashing will stop.
To activate Spa Mode,
press buttons C and D simultaneously. All LEDs will
flash three times.
Wireless Remote Setup
Software Versions
Network Settings
Shutdown
Audible Alarm
Spa Temp Notify
Access Code
Contrast Adjust
Backlight Adjust
Sleep Timeout 3 min
Please Enter Your Four
Button Access Code:
Spa Temp Down
Spa Temp Up
PS Heater
Blower
Spa Light
Spa Night
Pool Light
Music
Shortcut #1
Functions
Shortcut #2
Functions
Содержание Eos Command Center
Страница 1: ...O w n e r s M a n u a l E Personalized Automated Control System ...
Страница 31: ......
Страница 32: ... 2005 Polaris Pool Systems Inc All rights reserved TL 560 12 05 ...