manualshive.com logo in svg

Polaris Eos Command Center, Руководство пользователя, Страница: 18 / 32

Поделиться
Скачать
Polaris Eos Command Center Скачать руководство пользователя страница 18

Alerts and Alarms

The following alert conditions will sound the audible alarm in addition to flashing the alert
message at the bottom of the display screen.

The following Alerts are flashing messages only.

Device Associations, Safety Delays and Lockouts 

Some equipment is dependent on other equipment for proper operation. The rules that
govern these dependencies or associations are referred to as 

Device Manager Rules

.

Manually activated devices are subject to these rules, meaning that even though a device
turned is “on,” it may not activate unless all the rules are met. The device manager rules
and other safety functions are listed below.

Heater 

When activated (turned on manually or by a schedule), the heater will only fire
(indicated by flame on display) if the circulation pump is on and the temperature
setpoint is above the current temperature reading.

There is a 45-second operational delay at initial startup of the heater. Once the heater
is active and the desired temperature is reached, the heater will turn off and remain
off until the temperature falls two degrees below the setpoint. This prevents the heater
from short cycling (i.e., turning on and off in rapid succession).

16

E

Alert

Pool High Temperature
Pool Low Temperature
Spa High Temperature
Spa Low Temperature
Wireless Remote Battery Low
WM#1 High PH Alert
WM#1 Low PH Alert
WM#1 High ORP Alert
WM#1 Low ORP Alert
WM#1 PH Overfeed
WM#1 ORP Overfeed
WM#1 Feeder Empty

Alert

WM#2 High PH Alert
WM#2 Low PH Alert
WM#2 High ORP Alert
WM#2 Low ORP Alert
WM#2 PH Overfeed
WM#2 ORP Overfeed
WM#2 Feeder Empty

Alert

Freeze Alert
WM#1 No Flow
WM#1 2 Minute Flow Delay
WM#1 Clean PH Sensor
WM#1 Cal PH Sensor
WM#1 Clean ORP Sensor
WM#2 No Flow
WM#2 2 Minute Flow Delay
WM#2 Clean PH Sensor
WM#2 Cal PH Sensor
WM#2 Clean ORP Sensor
Solar Purge Delay
Solar Panel Temp Too Low
Spa Has Reached Set Temp

Alert

Cleaner Requires Pool Mode
Standby Mode
CPC-ACT Comm Failure (Cable/Activator)
CPC-WM1 Comm Failure (Watermatic)
CPC-WM2 Comm Failure
SCB Comm Failure
X10 Comm Failure
Valves Turning
Heater Cooling Down
91 Check Salt
92 Chlorinator No Flow
Check Chlorinator

Содержание Eos Command Center

































Отзывы:

Нет отзывов