Polaris Eos Command Center, Руководство пользователя, Страница: 22 / 32

The antenna for the Wireless
Remote is positioned to ensure
strong, clear communication
between the remote and the
Eos Command Center from
anywhere within the coverage
area. The coverage area, shown
here in gray, spreads out in a
circle from the antenna location.
For optimum performance,
the remote should be used
within line-of-sight of the antenna
and away from areas where
obstructions might interfere
with the radio signal.
Some objects that can prevent communications are:
In-House Panel (Wired) Remote
To access the Setup screen, press the left and right arrow keys of the remote
keypad simultaneously.
Software Version specifies the active
software version.
Contrast controls readability of text on
the screen.
Backlight controls illumination of screen.
Use Backlight Timeout to set a time limit for
inactivity after which the display turns off. Hit any
key to reactivate the display.
When Audible Alarm is checked, the alarm in
this remote device signals when an alert
condition exists.
Access Code is a security feature available
on the remote control devices. When enabled,
system change capabilities are limited to
authorized users.
If two In-House Panels are installed on a system,
the
Remote Channel on the second remote
must be adjusted to a different channel to
allow simultaneous use.
20
E
Heater
Pump
Filter
Pool
House
Antenna
Position
E
ENTER
Wireless
Remote
Wireless
Antenna
E
Aluminum siding
Cyclone fences
Wrought iron
Steel framing
Leaded glass
Mylar protected windows and doors
Stone walls and structures
Gas filled windows and doors
Microwave ovens
Other 5.6 GHz frequency devices
Wired Remote Setup
Tue, Aug 03 2:04 pm
Software Versions 01.00.04
Contrast Adjust
Backlight Adjust
Backlight Timeout 3 min
Audible Alarm
Access Code
Remote Channel 0