Polaris 850 PRO-RMK 155 2.6" QD 2021, Руководство пользователя

Страница: 155 / 747

2
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
2.19
HOOD REMOVAL / INSTALLATION
CAUTION
The hood and side panels protect the operator from
moving parts. Never operate a snowmobile with the
side panels open or removed. Always ensure that the
hood and side panels are installed and securely latched
before starting the engine unless instructed to do so for
servicing reasons.
HOOD REMOVAL
1. Remove the left and right side panels.
2. Rotate the 1/4 turn fasteners
q
at the rear corners of
the hood.
3. Disconnect the hood wire harness connector
w
.
4. Remove the hood assembly from the vehicle.
NOTICE
Store the hood in a position that will not damage the
brake cooler duct.
HOOD INSTALLATION
1. Install the hood by inserting the front of the hood into
the nosepan.
2. Lay the hood down onto the overstructure.
3. Reconnect the hood wire harness connector.
NOTICE
Verify the harness connectors are clean and dry prior to
assembly.
4. Secure rear of the hood to the console with the 1/4
turn fasteners.
5. Reinstall the left and right side panels.
MAINTENANCE