Polar Electro Cardio GX, Руководство пользователя

Страница: 16 / 59

16
Green led is blinking
every 3 seconds. Connector is transmitting.
Stop transmitting
sound, two beeps. Connector stops detecting and transmitting heart rate.
Red led is double blink-
ing every 5 seconds for
30 seconds.
Stop recording sound.
Transmitting cannot be started.
Red led is double-blink-
ing every 5 seconds for
10 minutes.
Stop transmitting
sound.
Transmitting has been stopped because the battery is empty.
See the table below for description for lights and sounds during charging/while the connectors are in the
charger.
Light/Sound Function
Red led is on for 5 sec-
onds.
Short sound.
Connector is properly placed into the charger.
Red led is blinking
every 5 seconds. Connector is charging.
Green led is blinking
every 10 seconds. Connector's battery is full.
Green led is on. During teaching, the user can activate the connection between a new con-
nector and the system by removing the connector from the charger.
Red led is on for 5 sec-
onds.
Three short sounds.
Connector is properly placed into the charger, but is in non-secured mode.
l
If a connector has already been paired with a base station, it needs to
be in non-secured mode so that it can be introduced to another base sta-
tion.
l
If a connector is introduced to the system, it cannot communicate with
the system in non-secured mode.
To change the mode to secured, remove the connector from the charger and
insert it back after a minimum of three seconds. Only one sound should be
heard.