Principle IV.
To use the various functions of
a basic selection,
press the SET/START/
STOP button to
move from function to
function
each of the four selections.
Principle V.
Once you have entered the SET
using
the SET/START/STOP
button
(one digit
on display), the
SELECT button assumes a different role. Now
the SELECT button
enables you to program
single digits within a function, while
the SET/
START/STOP button
cycles you between the
under SET selection.
cycled
t h r o u g h t h e f u n c t i o n s ,
the SET/
START/STOP button,
the flashing of one
single digit stops and
the SELECT button
assumes
role enabling you to return
to the selection cycle.
P R O G R A M M I N G
Y O U R P O L A R
A C C U R E X N V H R M
T I M E
What does this selection do ?
In the basic mode it shows you the time of day
and the date. It also allows you to set the
correct time, the date and an alarm. You can
light up the display in the dark by pressing the
SIGNAL/LIGHT button.
Why might you use this selection ?
To set the correct time or date when you take
the Wrist Receiver into use for the first time, or
to change the
if you travel to other time
zones. You may use the alarm function to wake
you up, or as a
S T E P - B Y - S T E P I N S T R U C T I O N S
F O R S E T T I N G T H E T I M E
1.
of day being
on the face of the
Receiver,
press the SET /START/STOP
button.
The word TIME
appears at the top of the
and the AM or PM
IS
flashing.
Note’
At
any
press
button
the a/arm setting
can
to go
Press
the SELECT button
to select AM or
PM.
3. When the correct choice appears on the
display,
press the STORE/LAP button
lock your selection.
