Polar Air VTAC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 19

CARE AND CLEANING
Turn off the Unit and disconnect the power supply before cleaning
-
3
-
Air Filters
To maintain optimum performance, change
the filter at least every 30 days. The most
important thing you can do to maintain the
unit is to change the filter at least every 30
days. Dirty filters reduce cooling, heating and
air flow.
Changing the filter will: Decrease cost of
operation, save energy, prevent clogged heat
exchanger coils and reduce the risk of
premature component failure.
NOTICE:
Do not operate the unit without the filter in
place. If a filter becomes torn or damaged, it
should be replaced immediately.
Operating without the filter in place or with a
damaged filter will allow dirt and dust to
reach the indoor coil and reduce the cooling,
heating airflow and efficiency of the unit.
Replacement filters should be purchased
from your local retailer where air conditioner
and furnace accessories are sold.
Filter size required is 20"x 20"x1".
Remove filter
Unit-mounted filter
To remove
and replace
the filter:
Indoor/Outdoor Coils
The exhaust coils on the unit should be
checked regularly. If they are clogged with
dirt or soot, they may be professionally steam
cleaned. You will need to remove the unit
from the case to inspect the coils because
the dirt build-up occurs on the exhaust side.
outdoor coils
Have the coils been cleaned regularly
Drain
Clean the drain system regularly to prevent
c
l
ogging.
Base Pan
In some installations, dirt or other debris may
be blown into the unit from the outside and
settle in the base pan
at
the bottom of the unit. In
some areas of the United States , a
"gel-like" substance may be present in the
base pan.
Check it periodically and clean, if necessary.