3. Encoding Mode
Encoding
This mode allows you to receive audio signals from an external audio device through the line-in jack and
encode them directly into an MP3 format.
1. In Browser mode, connect one end of the line-in cable to the earphone jack or line out of your
audio player. Connect the other end to the line-in jack on the RipDrive.
2.
While playing the track you want to convert to an MP3 file, press the
Rec
button.
3.
The recording and remaining times will appear on the LCD screen. If the
Rec
button is pressed
again, recording will pause.
4. When Encoding is finished, press the
Stop
button to put the RipDrive in
Wait
. Press the
Stop
button again to save the encoded file in the ENCODE folder.
5.
The file will now show in the contents of that folder.
6. Press
the
Play/Pause
button to play the file.
Voice Recording
This feature enables you to record voice memos. Use the built-in microphone to record a voice memo.
The procedure for recording a voice memo is the same as that of encoding to an MP3 format, except for the
line-in connection.
1.
In Browser mode, when the RipDrive is not playing, press and hold the
Rec
button to start a
recording.
2.
To stop recording, press the
Stop
button. The RipDrive will now show
Wait
on its LCD screen.
Press the
Stop
button again to save the file to the
VOICE
RECORD
folder.
3.
The file will now show the contents of that folder.
4. Press
the
Play/Pause
button to play the file.
Note:
To pause a recording press
Rec
.
To resume a recording (from pause) press the
Play/Pause
button.
34