- 8 -
2000_DE-ATTAWCHING_2620
EN
Attaching of machines with 3-point hitch
- Pin the implement to the 3-point attachment.
- Fasten the hydraulic lower link (4), so as the implement
cannot swivel out to the side. Insert and secure the
support feet on both sides (5).
- Attaching the upper link depends on whether you use
a jockey wheel (optional).
Utilization without jockey wheel:
- Insert the upper linkage in slot (A) or in the locked
slotted hole (L).
- Lock the slotted hole with the console (K).
TIP
First attachment without feeler wheel:
If the hatch (K) isn't screwed together with the slot, fix the
hatch (K) in the slot using screw (S) and the associated
pipe.
L
A
K
S
ATTACHiNG
Utilization with jockey wheel:
- Insert the upper linkage in the middle of the slotted
hole (L), so that the jockey wheel has enough
movement range in both directions.
- The console (K) must be dismounted so as not to
affect the movement range through the slotted hole.
L
K
- Before first utilization, check the cardan shaft length
and adjust if necessary (see also chapter "Cardan Shaft
Adjustment" in Annex B).
- When using the hydraulic swath cloth folding (optional),
connect the single action hydraulic hose.
Swing headstock locking during road
drive and for parking
For transport, you must lock the swing headstock (SB) with
the help of plug-in bolts.
C = working position
D = transport position
C
EN
SB
TIP
Only reinsert locking pin with machine raised.
