- 17 -
2000_EN_WARTUNG_2620
EN
Safety advice
wARNINg
The machine starting to move or being tipped may lead
to risk of an injury resulting in death or other serious
injury during setting, maintenance or repair work.
•
Park the machine only on solid, level
ground.
•
Bring the device into working Position.
•
Before carrying out setting, maintenance or
repair work to the machine, switch off the
tractor engine and remove the key from the
ignition.
•
Do not work under the machine without it
being supported safely.
wARNINg
Risk of serious injury through escaping oil.
•
De-pressurize the hydraulic system prior to
any work on the system.
Maintenance and Repairs
To keep the machine in good condition also after long use,
please bear in mind the following instructions:
-Retighten all screws after the first hours of
operation.
- You must check especially the zinc screws
and the swivelling frame connections.
- Always maintain the recommended air pressure in the
tires.
- Lubricate the lubricating parts according to the
instructions (see lubrication schedule).
Grease the lubrication nipples with universal lubricant
every 20 operation hours.
Cardans
- Lubricate cardan shafts every 8 operation hours.
- Take apart the sliding profiles and lubricate them well.
Cleaning of machine parts
Attention! Do not use a high pressure cleaner to clean
bearings and hydraulic parts.
- Danger of rusting!
- After cleaning, lubricate the machine according to the
lubrication chart and carry out a brief test run.
- Cleaning with too much pressure may damage the paint.
winter storage
- Clean implement thoroughly prior to winter storage.
- Park where protected from the weather.
- Protect exposed parts against rusting.
- Grease all lubrication points according to plan.
- Oil all of the articulations well and lubricate the bearings.
MAiNTENANCE
