- 16 -
1400_GB-Multitast_293
GB
Swather with "Multitast" system
General
Feeler wheels are fitted to machines with the "Multitast" system The rotor units are not rigidly positioned but can be
swivelled up and down (approx. 4°) via a swivel joint.
Using the feeler wheel enables optimal adaptation to the ground when the surface is extremely uneven.
As the tines are located very close to the feeler wheel, these can also ideally follow the uneven ground. The result is
very clean raking.
Important!
Changeover for
the relevant
operation is
described on the
following page.
Please follow
the instructions
exactly so as to
avoid damaging
the machine.
THE "MULTITAST" SYSTEM
Machine with feeler wheel:
- The front axle is turned forward.
- The rear axle is turned 180° to the back.
Machine without feeler wheel:
- The front axle is turned forward.
- The rear axle is also turned forward.
Fitting the axles
