EN
39
7. SECURING THE PREMISES
7.1 Arming the System
To arm the system, you can operate as below:
By Wireless Key: Press key.
By Panel: Press
button when home screen is displayed.
By RFID tag: Put the RFID tag close to the RFID area when system is disarmed.
By APP: Press the Arm icon, then select the Exit Delay.
By remote SMS: Send a message 1234#1 (“1234”is User Password) to the panel, then
an acknowledgement SMS will be returned if armed.
The system will announce “System Armed”. Home Screen will displays the “Armed”icon
and the countdown bar. You must leave the premises before the Exit Delay expires. If
the “Arm SMS”
is enabled, you will receive a SMS notification.
All burglary zones, interior & perimeter, are armed.
7.2 Arming in Stay Mode
This mode is used when you are staying home.
To arm the system in stay mode, you can operate as below:
By Wireless Key: Press
key.
By Panel: Press
button twice when home screen is displayed.
By RFID tag: Put the RFID tag close to the RFID area when system is disarmed.
By APP: Press the Stay Arm icon.
By remote SMS: Send a message 1234#3 (“1234”is User Password) to the panel,
then an acknowledgement SMS will be returned if armed.
The system will announce “System Armed”. Home Screen will displays the “Stay
Armed”icon. If the “Arm SMS”
is enabled, you will receive a SMS notification.
Perimeter burglary zones ( Zone Type programmed as Stay Arm Active ),
such as windows and doors are armed.
7.3 Disarming the System
To disarm the system ,to silence alarm ,to clear trouble displays and to cancel
the alarm that is in progress , you can operate as below:
By Wireless Key: Press
key.
By Panel: Press
button when home screen is displayed.
By RFID tag: Put the RFID tag close to the RFID area when system is armed.
By APP: Press the Disarm icon.
!
!
