EN
31
Version
Used to display the firmware and MAC address of the WiFi
module, the firmware and IMEI of the GSM module and Serial
Number of panel
Description
1. Arm Beep: When enabled, the system will announce the system status when armed
or disarmed.
2. Keypad Lock: The system will lock the keypad if no operation during 30 seconds on
Home Sreen. To enable the keypad, you must enter the valid User Password.
3. Backlight: If disabled, display backlight turn off after 30 seconds if no operation on
Home Sreen.
4. Door/Window Open Warning: If enabled, the system will generate a Exit Alarm
Warning notification when you leaving a door or window open after the exit delay
expires.
5. System Password: used for keypad unlocking and SMS remote settings.
6. User Password: user for keypad unlocking, SMS Remote Control and Alarm text
notification prefix Setting.
7. Language: Voice Announcement, Displaying and SMS notification will be in the
selected language. After selecting the desired language, the panel will reset.
8. Initialization: If the factory default configuration is loaded, any data that has
already been programmed into the system will be changed into the Factory Default
Configuration!
