EN
35
- Operating the Wireless Switch to go into the Sniffer mode( refer to user guide of
wireless switch ) .
- Press the “on” button
and the “off”button
in turn , The panel displays ”
Learn Signal Sent” and sends a transmission signal twice to the Wireless Switch.
- The Wireless Switch gives a successful indication.
To test if pairing ok, press “on”and “off”to check if the wireless can be opened and
closed.
When a sound alarm occurs, the Wireless Switch will be opened until the
system is disarmed or alarm sounder timeout occurs.
3.8 Home Automation
Pairing with Wireless Switch
To pair with the wireless switch (up to 7 switches), refer to section 3.7“Pairing with
Wireless Switch”.To test if pairing ok, press “on”and “off”to check if the wireless can be
opened and closed.
You can open or close the wireless switch via Mobile APP.
3.9 Message Recording
Message Recording and Playback
Your system can Record/Playback/Delete a brief message(up to 20 seconds) that can
be played back later. The message will be played to the remote when a alarm call is
connected.
- Select “Main Menu->Record->Record”->the system displays the Record screen.
- Ready to record when “Recording”is displayed in the title box and the system display
will count down the recording time remaining.
- Speak into the microphone and the recording automatically stops after the time
expires.
- The system plays back the message automatically.
- Press
button to save the message.
3.10 Arm/Disarm Automatically
The feature can be used to program the system to arm or disarm the system
automatically at a daily time.
Arm Schedule
- Select: “Main Menu->Timer->Arm Timer”, the system displays the Arm Timer
programming screen.
- Use
to scroll to
, then use digits keypad to enter the Daily Arm time (in 24-
hr).
- Use
to scroll to
, then use
to select “on”.
- Press
to save your new settings.
!
!
