©
2018Pneumex, Inc. All rights reserved
17 . 8/27/2018
Adjust Width
The width of the PneuWalker™ can be easily adjusted . Wider dimensions allow for use over treadmills
and narrower for easy passage through interior doorways.
On the front of the PneuWalker™ towards the bottom are two gold pin knobs. These knobs pull out to
adjust the width.
The wheel base can then be pulled outward and widened in 2 inch
increments. Twist the pin knob to hold desired position. Make sure
you use the same positions on each side to maintain proper bal-
ance of the PneuWalker™.
There are 5 adjustment possibilities, 2” apart.
Position # 1:
26.5 “ narrowest
Position # 2
30.5 “
Position # 3
34.5”
Position #4
38.5”
Position # 5
42.5” widest
Pull both pins out and turn 1/2
revolution to unlock position.
Lock wheels on one side.
Standing inside the unit, pull up
on the handlebar holding it
close to the upright and slide
away from locked side to
desired width. Replace pin
knob to hold new position.
Widen
the PneuWalker™ for use over treadmills.
Narrow
to allow for easy passage through doorways.
Width Adjust Pin
