©
2018Pneumex, Inc. All rights reserved
19 . 8/27/2018
Control Panel
Before putting a patient in the PneuWalker™ ™ you should familiarize yourself with the Control
Panel located between the uprights.
When to use Exercise or Balance Mode
Exercise Mode
Exercise mode lets the user perform vertical movements with consistent unweighting . For exam-
ple: when you are retraining the sit to stand motion, or working on stepping up and down steps.
Balance Mode
Balance mode lets the user perform exercises involving less vertical movement without fear of fall-
ing. The system supports the entire body weight during loss of balance, allowing a fall of no more
than three to six inches.
OFF
OFF mode releases the air from the system quickly. This mode can be used to re
-
weight a person
quickly if desired.
Pressure gauge
Regulator knob
Mode selector
Indicates the number of
pounds (white numbers)
or kilograms (orange
numbers) the system is
unweighting
Gradually increases (+) or
decreases (
-
) the amount
of unweighting lift
Provides choices of
Exercise, Balance, or Off