1
USER INSTRUCTIONS
PU PERCHING STOOL RANGE
L35555 Adjustable Height Stool
L35567 Adjustable Height Stool with Armrests
L35579 Adjustable Height Stool with Armrests &
Backrest
L35580 Adjustable Height Stool with Armrests &
Padded Backrest
L61049 Extra Low Adjustable Height Stool with
Armrests & Padded Backrest
L61050 Extra Low Adjustable Height Stool with
Padded Armrests & Backrest
General Safety Warning
Please make sure that you read and follow
these instructions carefully. Keep these
instructions in a safe place for future reference.
Maximum User Weight
25st
160kg
1.
INTENDED USE
The perching stool range is intended to be used to provide a stable, seated support, where a user is unable
to stand for long periods, the seat slopes forward to allow the user to achieve a relaxed “perching” position
when sitting and also to assist when rising.
L35580 Shown
2.
SAFETY
Warning:
The maximum user weight must not be
more than 160Kg (25st).
Inspect product at regular intervals for signs of wear
or damage
Do not use if you see or suspect a fault.
3.
UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
4.
HEIGHT ADJUSTMENT
To adjust the stool to the desired height, remove
the plastic clips connecting the stools’ legs and leg
extensions.
Slide the leg extensions to the required position,
ensuring that all legs are equal in height.
Replace the plastic clips ensuring that each clip is
fully connected.
Note:
Ensure the floor surface is level and even to
avoid rocking.
5.
MAINTENANCE
Inspect the product regularly for signs of wear or
damage, pay particular attention to the condition of
the ferrules
Check that all fixing clips are inserted correctly and
there is no excessive movement.
Check for general wear or damage.
If you see or suspect a fault do not use – contact
your dealer immediately
6.
CLEANING INSTRUCTIONS.
Clean regularly, use a general purpose, neutral
detergent and warm water
Please check the suitability of the product before
use. Do not use abrasive cleaners or cloths as this