Precision Measurement Engineering, Inc.
(760) 727-0300
www.pme.com
2
Warranty
1-YEAR LIMITED WARRANTY ON miniDOT HARDWARE
Precision Measurement Engineering, Inc. (PME) warrant that the miniDOT Logger shall be
free of defects in workmanship and materials, under normal use, for a period of one year
from the date of shipment. This warranty is made only to the original purchaser. In the event
a miniDOT Logger covered by this warranty fails to operate according to our published
specifications, then return it freight pre-paid to PME or an authorized Service Provider. PME
will repair the unit at no charge to the customer and bear the cost of return shipment.
Carefully pack all components, as the customer is responsible for any freight damage.
This warranty does not apply to services or consumable / expendable items (such as
batteries, fuses and ropes) required for general maintenance. Equipment manufactured by
other companies (such as meteorology sensors, solar panels, etc) are warranted only to the
limit of the warranties provided by their original manufacturer.
PME makes no warranty, either expressed or implied, that the sensors will be operable after
they are exposed to adverse environmental conditions, such as bio-fouling, oil fouling,
freezing temperatures or others.
This warranty is void if, in our opinion, the miniDOT Logger has been damaged by accident,
mishandled, altered, or repaired by the customer, where such treatment has affected its
performance or reliability. In the event of such treatment by the customer, costs for repairs
plus two-way freight costs (no COD shipments will be accepted) will be borne by the
customer. In such cases, an estimate will be submitted for approval before repair work is
started. Items found to be defective should be returned to PME carefully packed, as the
customer will be responsible for freight damage.
Incidental or consequential damages or costs incurred as a result of the product malfunction
are not the responsibility of PME.
For all warranty or non-warranty returns please obtain, complete, and submit a RMA to PME.
This RMA form may be obtained at
http://www.pme.com/HTML%20Docs/RMAform.html
.
After submission of this form, then PME will respond with a RMA number. Please place this
number on all shipments and related communications.
