PCI 9054RDK- LITE Hardware Reference Manual v1.3
2
© 2006 PLX Technology, Inc. All rights reserved.
1.2 Features
The PCI 9054RDK-LITE Rapid Development Kit
(RDK) is a PCI Bus Master Prototyping Kit,
which contains a four-layer, assembled PC
board with dimensions of 12.28"L x 5.20"W and
the following features:
•
PLX PCI 9054 PCI I/O Accelerator in a
176-pin PQFP package.
•
Socketed serial EEPROM for
configuring the PCI 9054.
•
Support for all three Processor/Local
Bus modes (C, J and M modes).
•
Thirty (30) surface mount prototyping
footprints and three (3) common pitch
BGA landscapes, which can be used
with different packages of
microprocessors, DSPs, FPGAs,
CPLDs, SDRAMs, SRAMs, data
transceivers, and general purpose logic
devices.
•
Socketed 32-pin PLCC footprint
provides designers a place for their flash
boot ROM.
•
On-board 32K x 32 synchronous SRAM
plus CPLD Memory Controller
demonstrating PCI 9054 Direct Slave
and DMA data transfers for both C and J
modes. The user is able to plug the
board into a PCI system and be
operational immediately.
•
Four (4) user-defined status/debug
LEDs.
•
In-system programmable CPLD with
equations in Verilog provide chip
selects, Processor/Local Bus arbiter,
and SRAM control.
•
Built-in DB9 connector and
programmable DTE/DCE RS232
transceiver for easy addition of a serial
port.
•
A pushbutton switch and reset generator
are capable of generating reset signals
to any device on the board.
•
Socketed
oscillator
for Processor/Local
Bus clock and PLL provide up to 50
MHz clock to the Processor/Local Bus.
•
5V to 3.3V voltage regulator to enable
card to plug into 5 volt only PCI slot
•
Six logic analyzer headers with standard
HP footprint to allow easy probing of
Processor/Local Bus signals.
•
Footprints for an RJ45 connector and a
USB type A connector provide additional
connections for customer prototyping.
•
PLX J-Bus Option Module (POM)
connector provides connection to other
PLX POMs or customer devices
•
A 25x30 0.1” grid through-hole area
allows easy prototyping with through-
hole components
1.3 RDK
Installation
To install the RDK hardware into your computer,
please refer to your computer’s instruction
manual for the correct preparation and
installation for adding a PCI card.
For all RDK software installation and usage
information, refer to the Software Development
Kit (SDK) documentation.
Содержание PCI 9054RDK-LITE
