Plustek NVR 4000, Руководство пользователя

Страница: 26 / 48

To add an event
1. Go to the “Advanced” page then click the menu “IPCam”
Æ
“Event Settings” to
enter the Event Settings window.
2. Click “Add” button to enter “Add Event Settings” page.
3. Check “Enable” to make the Event Settings effective.
4. Define a name for the event setting, and choose the event’s “Priority” from the
dropdown list.
5. Choose the “Event” you want to respond to by clicking the radio button of
Motion Detection or Input Ports.
•
For “Motion Detection” event, you’ll need to make Motion Detection
settings for the camera (Please refer to Motion Detection for more
information). Choose the Motion Detection window from the dropdown list
and the motion detection event as “starts”, ”stops” or ”starts-stops”.
•
For “Input Ports” event, you’ll need to connect an external sensor or
device to the camera in the camera’s input port. Choose the input event
from the dropdown list as “active”, ”inactive” or ”change”.
6. You may activate the Output Port by checking the “Activate Output Port”
option. When an event is triggered, the output port will enable the IP Camera
to send alarm signal to external sensor or device. (Please refer to the
camera’s manual for more information on External Input/Output Interface.)
Select the active time period of the output port. The port can be kept activated
during the whole event or for a period after the event is triggered.
7. If you want to send an alert email to your desired email address when an
event is triggered, check the “Send email notification” option.
22