Plustek NVR 4000, Руководство пользователя

Страница: 21 / 48

1. Go to the “Advanced” page then click the menu “Network” Æ
“WAN” Æ ”SMTP”.
2. When more than one email addresses have been added, you may click on
the radio button in front of a sender address and use “UP” “DOWN” button to
move the email address’s priority in the list.
UPnP
To enable UPnP:
1. Go to the “Advanced” page then click the menu “Network” Æ
“WAN” Æ ”UPnP”.
2. Check “Enable” if you want the NVR to act as UPnP service. And you’ll be
able to visit the NVR from “My Network Places”.
LAN
To enable NVR as DHCP Server:
1. Go to the “Advanced” page then click the menu “Network” Æ “LAN”.
2. Check “Enable” if you want the NVR to serve as a DHCP Server and
dynamically allocate IP addresses to the IP Camera(s) connected.
3. Enter the Starting and Ending IP Pool Addresses to define the IP Address
range the IP Camera(s) can fall into.
17