E-7
Basic Setting Operations
Here we explain how to display and close the settings screens, using the Internet Explorer web browser as an example.
Preparations:
1. Use a LAN cable to connect the network board’s LAN terminal to the LAN port on the switching hub.
2. Turn on the network board’s power.
Launch the web browser on the computer con-
nected to the network.
“Page cannot be displayed” may in some cases appear, but sim-
ply continue to the next step.
Setting before using a network
Input the network board’s IP address.
In the web browser’s URL field, input the IP address that was set,
and then press the [Enter] key. Entry must be in alphanumeric
characters. When the network board has been correctly con-
nected to network, the user authentication screen appears.
Input the User Name and Password, and then click [OK].
• No password is set upon purchase. Input “admin” in alphanu-
meric characters in the User Name field and click [OK].
Note
• The user name and password are case sensitive. Be sure
to input them properly.
• The account is locked after three incorrect password
attempts. To unlock, unplug the power cord from the
power outlet then plug it back in.
Connecting the network board to the network upon pur-
chase
Upon purchase, the network board’s IP address and subnet mask
are not yet set. Be sure to check the section “Simple Network
Settings (via USB)” (see page E-4) and set the IP address, etc.
From the menu, click the desired setting item.
The page you required is displayed.
See the description on each appropriate page.
• CB Setup (page E-9)
• Network Setting
Board/Printer Setting (page E-11)
Save Setting (page E-13)
SSL Setting (page E-14)
• Board File List (page E-25)
• Administrator Menu
User Setting (page E-15)
Security Setting (page E-16)
Disk Management Setting (page E-17)
• Header/Footer (page E-18)
• CB Information (page E-18)
All manuals and user guides at all-guides.com
