Plus N-204, Руководство пользователя, Страница: 16 / 54

E-16
Printing
Press the Color Print or the B/W Print button to print.
Press the Number of Copies button and select the number of copies.
Note
• “01” is selected when the power is turned on.
• Up to 10 copies can be specified and displayed on the display window.
• The number of copies increases by 1 each time the Number of Copies button is pressed, and “
” is displayed
after “10” (this is used for test printing: see page E-51). When the button is pressed again, the display switches to
“01”. The number switches continuously if the button is held in.
• After setting the number of copies, proceed to step 4 within 1 minute. The number of copies is reset to “01” if no
operation is performed within 1 minute.
• The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and the printing operation is
performed.
Cancellation of the print operation in progress
When the ON/Standby button is pressed, the reading of the sheet stops, and the partially read image data is printed.
Wait until the sheet is expelled from the printer.
Note
• If the ON/Standby button is pressed while the sheet surface is being read, printing is interrupted and only part
of the image will be printed.
• The one-screen portion is reduced to A4 paper size and printed.
For wide type copyboards (model N-20W), the image is compressed about 75% in the horizontal direction. To
print with the same proportions as the image on the sheet surface, see “Making the Device Settings” (page E-33).
• A flashing “ ” in the display window indicates a print error. See “Meaning of Error Messages” on Page E-48.
• When printing, a time stamp (date and time) is printed at the top right of the sheet. See “CB Setup” on page E-32,
E-40.
or
• Switch off the printer power.
Note
• When the Erase Reminder function is set to “Enable”
When the ON/Standby button is pressed, the display window and all the indicators flash simul-
taneously, the sheet automatically moves to the surface that is not yet erased and the power turns
off. To set the Erase Reminder function to “Disable”, see page E-34, E-40.
* The Erase Reminder function may not work properly due to dirt on the sheet's adhesive sections
or marker residue.
• If no button is operated within 30 minutes, the power turns off automatically (auto power off).
When the power is turned off, scanned images stored in the unit’s internal memory are cleared.
• The auto power off function is canceled when the copyboard and computer are connected by USB cable.
When the copyboard is not going to be used, press the ON/Standby button and switch
off the power (standby mode).