10
10.7 31 Point Check
Service &
Maintenance
LOLER / SERVICE Repair Check List
Lift no:
Vehicle Reg:
Engineer’s Name:
Date:
Customer Details:
Address, Contact:
Tel. Number:
Poor
Ok
Good
1
Ramp stop (roll-off) operation/condition
2
Condition of ramp stop cylinder (corrosion, leaks, loose caps)
3
Bridging plate operation/condition
4
Carriage lock and rocker(s) working correctly
5
Platform stability
6
Platform extension operation (stops tight)
7
Platform stowage set correctly
8
Handrail and side guard operation/condition
9
Cleating and wearstrip condition
10 All set pins secure/ Grub screws tight
11 All fasteners tight
12 In/Out Motor operation/condition/ check top cog
13 Condition of all bearings and camfollowers/ grease x 4
14 Umbilical hose condition
15 Check lift isolator (cab or door switch)
16 Condition of lifting cylinders (corrosion, leaks, loose caps)
17 Up/Down hydraulic pump operation/condition (relief valve) with SWL on lift
18 Hand pump operation/condition/ check tightness
19 All hoses in good condition/ arm hose/ cylinder hoses and platform pipe & hose.
20 Hydraulic fittings in good condition/ ports on power pack tight
21 Wiring loom condition (crimps, fuse holder, earth wires, etc)
22 Box lock operation/condition
23 Condition of box tracks (not bent or indented)
24 Top and bottom sheets secure
25 Box brushes present and secure
26 Condition of stowage box and fitting brackets
27 Lift correctly lubricated/ cam followers / extension/ switches and cam and cranks.
28 If powermatic, in/out operation & switches set correctly
29 Speed of operation acceptable
30 Handset condition
31 Labels and operating instructions
Engineers Comments
10.7 31 Point Check
Содержание Access ACC-1150
