10
10.3 Daily Inspections
Service &
Maintenance
Daily Inspection Check List
Lift no:
Vehicle Reg:
Engineer’s Name:
Date:
Customer Details:
Address, Contact:
Tel Number:
OK
1 Visually check fluid level using dip stick.
2 Visually check for any leaks or damage.
3 Check for obvious signs of damage, and notify as manager if necessary.
4 Ensure that the Operation instructions are visible.
5 Ensure the hand pump handle is present.
6 Ensure the Handset control is working correctly and there are no signs of
damage.
7 Ensure the Platform is clean and dry.
8 Ensure the Box Lock is working correctly.
9 Ensure the Carriage centre lock is working correctly.
10 Ensure the Handrails are clean, working correctly and rust free.
11 Ensure the Handrail guards are present and undamaged.
12 Ensure the Roll-Off-Ramp operates correctly and lands on the ground.
13 Ensure the warning lights are operating correctly before using the lift
(If fitted).
10
10.3 Daily Inspections
SERVICE &
MAINTENANCE
IF IN DOUBT, CONTACT THE MANUFACTURER
Lift Inspection checks are required on a DAILY basis by the lift operating company.
The working life of your lift will be greatly prolonged if these steps are adhered to.
This should include the following:
10
10.3 Daily Inspections
SERVICE &
MAINTENANCE
Lift Inspection checks are required on a DAILY basis by the lift operating company.
The working life of your lift will be greatly prolonged if these steps are adhered to.
This should include the following:
1. Visually check fluid level using dip stick
2. Visually check for any leaks or damage.
3. Check for obvious signs of damage, and notify a manager if necessary.
4. Ensure that the Operation instructions are visible.
5. Ensure the hand pump handle is present.
6. Ensure the Handset control is working correctly and there are no signs of damage.
7. Ensure the Platform is clean and dry.
8. Ensure the Box Lock is working correctly.
9. Ensure the Carriage centre lock is working correctly.
10. Ensure the Handrails are clean, working correctly and rust free.
11. Ensure the Handrail guards are present and undamaged.
12. Ensure the Roll-Off-Ramp operates correctly and lands on the ground.
13. Ensure the warning lights are operating correctly before using the lift (If fitted)
IF IN DOUBT, CONTACT THE MANUFACTURER
Содержание Access ACC-1150
