Plinius KAITAKI, Инструкция по эксплуатации

Страница: 20 / 22

18 PLINIUS KAITAKI
Troubleshooting
NO SOUND FROM THE UNIT
If the unit is not reproducing audio take the following steps:
•
Check the source is correctly connected to an appropriate input on the unit.
Refer to the Installation & Operation section on page 13.
• Check the source is playing, and not paused or muted. If it has adjustable
volume, check this is at the usual output level.
• Check the unit is set to select the correct source input. Adjust the source
selector for the correct source component.
• Check the volume. Turn the unit volume up to a point just below the normal
listening level. DO NOT turn the volume up to maximum in case the sound begins
to come through the speakers.
• Check the unit is not in Mute. If the Display LED is dim, this indicates the unit is in
Mute mode. The Display LED should be full brightness for operational mode.
• Check the unit is not in Standby. If the Display LED is varying in brightness, this
indicates the unit is in Standby mode. The Display LED should be full brightness
for operational mode.
POWER FAILURE
The unit may have suffered mains fuse failure.
•
Mains Fuse Failure: Check the mains fuse and replace if needed.
Refer to the Product Features section on page 16 for further information.
NOTE: If the unit immediately or repeatedly suffers mains fuse failure, there may be a
major problem and you should contact your Plinius dealer.