Plinius KAITAKI, Инструкция по эксплуатации

Страница: 15 / 22

13 PREAMPLIFIER
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This preamplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this preamplifier in any position where liquids or any foreign
material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Kaitaki Preamplifier should be made in the same order as they
are listed in this section. DO NOT attempt to connect your Kaitaki Preamplifier until
you have read and fully understood these instructions. Should you require further
assistance, please contact your Plinius dealer.
DO NOT POWER UP YOUR PREAMPLIFIER UNTIL YOU HAVE CONNECTED
YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.
SOURCE COMPONENT INPUTS
Connect your source to the input of the Kaitaki Preamplifier using suitable single-
ended RCA or Balanced XLR interconnect cables only. For RCA, make sure you
connect the red coded cable to the red RIGHT RCA input, and the white cable to the
white LEFT RCA input. Also make sure the RCA connectors are a snug fit and are
inserted all the way in.
For CD XLR input connection, make sure you connect the RIGHT XLR input and LEFT
XLR inputs to the right and left outputs from your source respectively. Also make sure
the XLR connectors click into place. Use the input selection switch to select RCA if
you are using RCA inputs or to select XLR if you are using XLR inputs.
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other. The
phono input should be connected to a suitable source turntable only.
CD PLAYER
KAITAKI CD INPUTS