Plinius KAITAKI Скачать руководство пользователя страница 14

12

PLINIUS KAITAKI

button increases volume, while the left side button decreases the volume.  Briefly 
press either button to make fine adjustments to the volume level.  Hold down either 
button to continually adjust the volume level.

7. MUTE

Pressing this button toggles the Kaitaki Preamplifier in and out of mute.

CD PLAYER REMOTE FUNCTIONS:

8. REPEAT

The repeat LED on the front panel will illuminate once this button is pressed.  The CD 
Player will play all tracks on the CD as normal, but then repeat all tracks from track 1 in 
an endless loop.  It does not repeat one track only, but will repeat the entire contents 
on the CD.

9. DISPLAY

This function enables you to quickly adjust the display brightness. Use this button 
to toggle between high, low, and off settings.  Note that whenever the compact disc 
drawer is ejected to change a CD, the display will automatically revert to full brightness.

10. CUE BUTTONS

Use these two buttons to cue through the track you are listening to.  Press and hold 
the right side button to cue forward through the track, or press and hold the left side 
button to cue backwards through the track.  Once the start or end of the track is 
reached, Cue will continue into the next track.

11. TRACK BUTTONS

The track buttons enable you to move forward (right button) or back (left button) through 
the tracks on the CD.  Press the button once to skip to the next track on the CD, or hold 
down to skip through multiple tracks. When you press the back button once the CD 
Player will revert to the start of the current track.  Pressing the back button again will 
skip back to the previous track. The track currently selected will be brightly lit.

12. STOP/EJECT

If the CD player is playing a CD, pressing the Stop/Eject button will stop play and 
return to track 1.  Pressing the button again will open the compact disc drawer so the 
CD can be changed.

13. PLAY/PAUSE

Press the Play/Pause button to begin playing the CD at the track selected.  The 
display LED corresponding to the track that is being played will vary in brightness.  
Press the Play button again, and the track will pause, designated by the LED flashing.  
If the compact disc drawer is open, pressing play will shut the drawer and start 
playing the CD from track 1.

Содержание KAITAKI























Отзывы: