Pliant CREWCOM CB2, Руководство по эксплуатации

Страница: 83 / 104

Restore Factory Defaults
Users can choose to restore factory defaults for the device or system. When restoring factory defaults,
these settings are reset to their original factory settings:
BaseStation Factory Settings
BaseStation Setting BaseStation Default Reset by “Restore Defaults”
Contrast 3 X
LCD Brightness High X
LCD Timeout 10 Seconds X
LED Brightness High X
Sync Settings Sync RF Only
X
Delete Pairings No Pairings X
Operating Mode Normal X
Radio Band Full X
Hopping Pattern A X
Intercom Type 2-Wire: OFF
4-Wire: OFF
X
Intercom Call OFF X
Intercom Mic Kill 2-Wire: N/A
4-Wire: blank
X
Intercom Echo Can 2-Wire: OFF
4-Wire: OFF
X
Intercom IN (2w/4w) 2-Wire: −6
4-Wire: 0
X
Intercom OUT (2w/4w) 2-Wire: +4
4-Wire: 0
X
Auxiliary IN 0 X
Auxiliary OUT 0 X
Stage Announce (SA) Relay Enable X
Stage Announce (SA) Audio 0 X
Local Channel Channel A
X
Local Mic Gain Dynamic: 6 (+23 dB)
Electret: 3 (-4 dB)
X
Local Sidetone Med (-12 dB) X
Local Volume 15
X
Operation - 76