Pliant CREWCOM CB2, Руководство по эксплуатации

Страница: 37 / 104

6. Proceed with connecting any hardwire connections to the BaseStation, if applicable.
TIP : Always confirm that the non-Pliant intercom system and the CrewCom CB2
wireless system are functioning properly separately before connecting them
together.
o
If connecting a 2-wire intercom system, connect it to the 2-wire intercom ports(s) on the
back of the BaseStation. For full connection and configuration instructions, see "2-Wire
Intercom Connectivity" on page 56 .
o
If connecting a 4-wire intercom system, connect it to the 4-wire intercom port(s) on the back
of the BaseStation. For full connection and configuration instructions, see "4-Wire Intercom
Connectivity" on page 60 .
Note : The 2-Wire and 4-Wire ports on a CB2 BaseStation cannot be used
simultaneously.
Setup and Installation - 30