Pliant CREWCOM CB2, Руководство по эксплуатации

Страница: 11 / 104

l
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit
(e.g., use of power strips).
Power Information
WARNING – DANGER! Users should exercise extreme care when working with
electricity. Additional care should be used when working with electricity outdoors during
inclement weather. When working outdoors or near water, always connect the system into
a ground-fault interrupting circuit.
AC Power Connection Safety
l
Always connect the power cord to the CB2 BaseStation’s supplied 14VDC external power supply
before connecting to the outlet.
l
The cord to connect the BaseStation power supply to the mains supply must conform to the
following specifications:
o
The mains power cord shall have an IEC C13 connector at one end and a mains power
plug at the opposite end.
o
An IEC C13 plug has three pins. The center pin carries the earth/ground. The remaining
two pins carry neutral and live circuits.
o
The conductors of the mains cords shall have adequate cross-sectional area for rated
current consumption of the equipment.
o
The mains plug that connects to the mains supply must be approved for use in the country
in which the equipment will be used.
o
The mains power cord must be an IEC mains 3-Wire grounding power cord complying with
standard IEC60320; IEC320/C13.
o
Mains power cords used in the U.S. must also comply with standard UL817.
Battery Safety
WARNING:DANGER! EXPLOSIVE GASES RISK
Safety Information - 4