Plextor PlexWriter 40/12/40A, Инструкция по установке и эксплуатации

Страница: 41 / 56

PlexWriter 40/12/40A Installation and Users Manual
35
5. Frequently Asked Questions about Recording
What media should I use for my PlexWriter?
To achieve 40X CD-R writing speed you must use certified 40X media; and to
achieve 12X RW writing speed you must use high-speed RW media. See
“Recommended Media “on page 37 for a list recommended media (including 40X
certified media) at the time this manual was printed. The most updated list of
supported media can be found on the Plextor web site at www.plextor.com.
When can I use CD-RW media?
CD-RW media can only be used for writing in ReWritable drives. It is readable only
in ReWritable drives or newer MultiRead CD-ROMs with UDF readers installed.
UDF readers are available from software companies that develop packet-writing
software. With CD-RW media you can:
‰
Use as if it were a large capacity floppy disc.
‰
Transport files to and from work.
‰
Copy your important data periodically.
‰
Store large projects as you develop them.
What writing speed can I expect with CD-RW media?
The PlexWriter 40/12/40A supports new high-speed CD-RW media, and can write to
this media at speeds of 4X, 10X, and 12X. You can also use conventional CD-RW
media in this PlexWriter; in this case, the drive writes at 4X speed.
When should I use CD-R media?
CD-R media can be read in most CD-ROM, CD-Recordable or CD-ReWritable
drives. Use CD-R media to:
‰
Permanently archive important data.
‰
Copy your music to CD for personal use.
‰
Create specific format discs.
‰
Create disc for distribution to others.
‰
Share non-editable presentations
Why does my unit record audio discs at a maximum speed of 24X?
Plextor has limited the speed of CD-DA (digital audio) recording to 24X in order to
avoid audio noise, which may be generated at speeds above 24X.