background image

Section 1. Getting Started 

4

  PlexWriter 40/12/40A Installation and Users Manual 

PlexWriter Drive Features and Controls 

Before proceeding, become familiar with the controls and features of your 
PlexWriter drive. Match the parts of your drive to the illustrations below. 

Front Panel 

 

 

 

Figure 1: Front Panel of the PlexWriter 40/12/40A Drive 

 

• 

Tray front door: Attached to tray drawer. 

 

• 

Headphone jack: Stereo mini-jack for headphones and powered speakers. 

 

• 

Volume control: Controls volume of headphone jack.  

 

NOTE: The volume control on the front panel of your drive adjusts only the sound 
level of the headphone jack. It has no impact on the volume level of the rear panel 
audio outputs.  

 

• 

LED indicator: Illuminated green during disc loading and when Buffer 
Underrun Proof is operational. Illuminated yellow when a disc is being read. 
Illuminated amber when writing a CD-R or CD-RW disc. The indicator changes 
its blinking interval to indicate different writing speeds. 

 

• 

Eject button: Push once to eject tray. Push again to insert the tray back into the 
PlexWriter. To prevent wear on the drive, always use the eject button to insert the 
tray. 

 

• 

Emergency eject hole: If the automatic eject button does not work, insert the 
emergency eject tool, paper clip, or other thin, rigid object into this hole to eject 
the tray. Turn OFF the power before using this feature. 

 

Содержание PlexWriter 40/12/40A

























































Отзывы: