Plextor 241040 ATAPI, Руководство по эксплуатации

Страница: 25 / 72

Section 2. Installing Your PlexWriter
PlexWriter 24/10/40A Operations Manual
21
12. Mount the PlexWriter drive in the computer using the four screws that were
supplied with your drive. Use only these screws.
CAUTION: Do not mount your drive in your computer using screws other than those
supplied by Plextor. You may damage the drive if you insert screws that are too long
or the wrong thread type.
Using Sound Boards and Audio Cables
Whichever category your sound board falls into, you will find that the best source of
information about installing the sound board in your computer is the board's manual.
Once you have successfully installed the sound board in your computer, you can
continue below for a description of the different cable connections that need to be
made.
Choosing and Connecting Audio Cables
When using Plextor drives with Plextor Manager 2000 software (if it was provided
with your drive), an audio cable is not necessary. Plextor Manager 2000’s player,
MVP 2000, plays Audio CDs digitally, eliminating the need for an analog cable
connection. (Plextor Manager 2000 can be purchased directly from Plextor if it was
not included with your drive.)
If you do need audio cables, you will have to purchase them. Refer to the table
below. A list of several vendors who offer audio cables is in “Appendix C: Helpful
Contacts.”
Audio Connection Cable
Required
How to Connect It
MPC audio source MPC-compliant
audio cable Connect to MPC audio
source, and to analog audio
output connector at the rear
of the PlexWriter.
Sound Blaster or
compatible sound board Sound Blaster-
compatible
analog audio
cable Connect to Sound Blaster-
compatible audio board and
to analog audio output
connector at the rear of the
PlexWriter.
Digital audio output Cable that’s
compatible with
SPDIF or
Digital_In. Connect to SPDIF or
Digital_In connector on sound
board (if sound board
supports digital audio) and to
digital audio output connector
at the rear of the PlexWriter.