Plextor 241040 ATAPI, Руководство по эксплуатации

Страница: 39 / 72

PlexWriter 24/10/40A Operations Manual
35
5. Maintenance and Troubleshooting
This chapter explains maintenance and troubleshooting procedures for your
PlexWriter drive.
With proper maintenance, you can prevent problems. If problems arise, you can
often solve many simple problems on your own, rather than wait for assistance from
a Plextor representative.
TIP: Read all of the section that pertains to you (PC or Macintosh). Many of the
problems discussed happen only rarely, and others may seem as if they do not
pertain to you. However, if you are familiar with the variety of problems that can
occur, you will be better prepared to deal with them if they do occur.
Upgrading Firmware
Plextor creates firmware revisions to meet the peculiar needs of large computer
manufacturers. It is rare that these will impact the performance or operation of your
PlexWriter drive. However, we advise that our customers always update drives with
the latest available firmware. Before troubleshooting a possible problem with your
drive please make sure to visit our web site at www.plextor.com to check if you have
the latest firmware.
To obtain new firmware for your PlexWriter drive:
1. Go to the Plextor web site at www.plextor.com.
2. Look for firmware upgrades in the Support area, on the Downloads page. There
is a description of the latest firmware revision and its intended use.
3. Download the firmware to your computer.
To upgrade firmware:
1. Run the executable file that you downloaded from Plextor’s web site.
2. Accept all defaults by continuing to click on the “Next” button until you see the
message:
Firmware update has completed.
If You Need to Disable DMA
If the firmware upgrade does not complete successfully, you may need to disable
DMA. In this case, please follow the appropriate procedure below.
NOTE: Your PlexWriter is Windows-XP-ready. Procedures for Windows XP will be
similar to those shown here.