Plenio VXA-4300, Руководство пользователя

Страница: 14 / 94

Some countries prohibit mounting of any electronic device on the vehicle dashboard. Be sure to check your
local laws for acceptable mounting areas before installing the car mount bracket.
Some newer vehicle models may have a heat reflective shield embedded in the windshield. This may in some
cases obstruct the GPS signal reception. If you encounter this problem in your vehicle, you need to purchase
an external GPS antenna.
Car mount installation reminders
Install the car mount on the surface of a vehicle:
•
That is smooth, flat and free of dirt and oil
•
Where the driver can easily view/reach it without taking his/her eyes off the road
•
Where the device will not obscure vehicle operation nor restrict driver
'
s view of the road
•
Far from the air bag deployment area
To set up the device on a vehicle:
This section shows how to install the car mount kit in a vehicle
’
s windshield using the suction cup. For dashboard
installation procedure using the self-adhesive power disc connector, refer to the VXA-5000/4300 Portable Navigator
Starter Guide.
1. Clean the mounting surface with a glass cleaner and a clean cotton cloth.
2. If the ambient temperature is below +15
°
C (60
°
F) warm the mounting area and the suction cup (e.g. with a hair
dryer) to ensure a strong suction bond.
3. Install the car mount on the selected area.
a. Mount the suction cup to the selected area with the locking lever away from the mounting surface.
b. Flip the locking lever towards mounting surface to create a vacuum between the suction cup and the mounting surface.
13
First things first
VXA-5000/4300 setup